Wheels

- Disc brake only - Thru Axle sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components

- Disc brake only - Sealed bearing hubs - 30mm Tubeless Ready rim - Does not include axles, tape, or tubeless components

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

Made with ultralight composite rims, this disc-brake cyclocross tubeless WheelSystem is made for chasing podiums or tackling rough roads, gravel and dirt. Features - Ultralight full composite 700C rims - Tubeless compatible using supplied rim strips and valves - 21mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim Laser/Sapim Race straight-pull stainless spokes- 28 hole front/rear - Alloy locking nipples - Giant alloy hub shell, 6-bolt compatible with pawl based driver system - Includes end caps for the following configurations: - Front: 100x12mm T/A - 1630g per pair

Made with ultralight composite rims, this disc-brake cyclocross tubeless WheelSystem is made for chasing podiums or tackling rough roads, gravel and dirt. Features - Ultralight full composite 700C rims - Tubeless compatible using supplied rim strips and valves - 21mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim Laser/Sapim Race straight-pull stainless spokes- 28 hole front/rear - Alloy locking nipples - Giant alloy hub shell, 6-bolt compatible with pawl based driver system - Includes end caps for the following configurations: - Rear: 142x12mm T/A - 1630g per pair

- Disc brake only - Sealed bearing hubs - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Disc brake only - Sealed bearing hubs - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Rim brake only - Sealed bearing hubs (QR 100) - Dynamic Balanced Lacing technology - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Rim brake only - Sealed bearing hubs (QR 130) - Dynamic Balanced Lacing technology - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Disc brake only - 12x100 front sealed bearing hubs - Tubeless Ready rim - Does not include axles, tape or tubeless components

- Disc brake only - 12x142 rear sealed bearing hubs - Tubeless Ready rim - Does not include axles, tape, or tubeless components

- Alloy 700c rims - Tubeless compatible using supplied rim strips and valves - 23mm wide rim for better tire performance - 30mm rim height - Stainless steel, straight pull, double butted spokes - Dynamic Balanced Lacing provides significantly higher transmission stiffness vs. traditionally laced wheels - Alloy locking nipples - Giant Alloy hub shell with pawl based driver - Centerlock disc compatible

Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 1 30 delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1380g per pair

The SLR 2 42 Disc WheelSystems are lightweight and robust carbon wheels that are built to last. Combining hookless rim design and optimized carbon layup with a modern, 19.4mm inner width, the SLR 2 42 & SLR 2 42 Disc deliver great value to performance cyclists who require minimal tradeoff between price, weight, and durability. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff and lightweight wheels - 42mm deep all-round rim profile with a 19.4mm inner width offers better support for today's higher volume road tires

The SLR 2 42 Disc WheelSystems are lightweight and robust carbon wheels that are built to last. Combining hookless rim design and optimized carbon layup with a modern, 19.4mm inner width, the SLR 2 42 & SLR 2 42 Disc deliver great value to performance cyclists who require minimal tradeoff between price, weight, and durability. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff and lightweight wheels - 42mm deep all-round rim profile with a 19.4mm inner width offers better support for today's higher volume road tires

When heavy duty cyclocross riding is your passion, the C 1800 is the right partner for any mission. With its high-end sleeved rim ready to take up MTB-sized rubber and the tough build featuring DT's sturdiest bladed spokes, it is right at home in anything from jumping obstacles to cutting through the mud to sprinting up steeps. Trademark DT Swiss reliability coming from the precision hubs and the superb wheel building quality guarantee trouble free rides year-in and year-out.

Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.

The CADEX 42 Disc WheelSystem is for cyclists who require maximum versatility and disc-brake power in hilly terrain and variable conditions. Featuring a hookless rim design to maximize aerodynamics and durability, as well as low-friction hubs for maximum power efficiency and the added control of disc brakes, the CADEX 42 Disc WheelSystem offers unparalleled performance at an ultra-light weight. - Hookless rim design helps reduce aerodynamic loss and, through a continuous carbon fiber structure, enhances overall durability - Custom-tuned aero carbon spokes offer excellent aerodynamic characteristics, superior stability in shifting winds, and ultra-light weight - Custom-tuned dynamic balanced lacing technology makes a stiffer, more efficient wheel designed for real-world applications - Precision reinforced carbon lay-up places carbon fiber only where needed, creating an exceptionally solid structure without adding any unnecessary grams - Low friction hub eliminates bearing friction, reducing potential watt loss

The CADEX 42 WheelSystem is for cyclists who require maximum versatility and lightweight performance in varied terrain. Featuring a hookless rim design to maximize aerodynamics and durability, as well as low-friction hubs to maintain maximum power efficiency, the CADEX 42's high-heat-tolerant brake track and proprietary pads ensure responsive, precise control. - Hookless rim design helps reduce aerodynamic loss and, through a continuous carbon fiber structure, enhances overall durability - Custom-tuned aero carbon spokes offer excellent aerodynamic characteristics, superior stability in shifting winds, and ultra-light weight - Custom-tuned dynamic balanced lacing technology makes a stiffer, more efficient wheel designed for real-world applications - Precision reinforced carbon lay-up places carbon fiber only where needed, creating an exceptionally solid structure without adding any unnecessary grams - CADEX-specific brake pad features a specifically designed channel to optimize water displacement as well as an all-new compound, allowing the pad to conform better to the brake track, resulting in more precise and effortless braking - Low friction hub eliminates bearing friction, reducing potential watt loss

The CADEX 42 WheelSystem is for cyclists who require maximum versatility and lightweight performance in varied terrain. Featuring a hookless rim design to maximize aerodynamics and durability, as well as low-friction hubs to maintain maximum power efficiency, the CADEX 42's high-heat-tolerant brake track and proprietary pads ensure responsive, precise control. - Hookless rim design helps reduce aerodynamic loss and, through a continuous carbon fiber structure, enhances overall durability - Custom-tuned aero carbon spokes offer excellent aerodynamic characteristics, superior stability in shifting winds, and ultra-light weight - Custom-tuned dynamic balanced lacing technology makes a stiffer, more efficient wheel designed for real-world applications - Precision reinforced carbon lay-up places carbon fiber only where needed, creating an exceptionally solid structure without adding any unnecessary grams - CADEX-specific brake pad features a specifically designed channel to optimize water displacement as well as an all-new compound, allowing the pad to conform better to the brake track, resulting in more precise and effortless braking - Low friction hub eliminates bearing friction, reducing potential watt loss

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher

Silver anodized alloy rim w/ 32 holes - KT silver alloy road hub - Stainless steel spokes - QR wheel

Sta-Tru Wheels ST735 silver anodized alloy single wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle - Silver stainless spokes

Fast, efficient and lightweight for long rides through mountain backroads but still tough and durable for big days across relentless gravel as well as fast rips on technical dirt; the all-new, go-anywhere CXR 1 represents the evolution of versatile performance.

Fast, efficient and lightweight for long rides through mountain backroads but still tough and durable for big days across relentless gravel as well as fast rips on technical dirt; the all-new, go-anywhere CXR 1 represents the evolution of versatile performance. - Optimized carbon lay-up places high-tensile strength carbon fiber at the most crucial points, ensuring a robust structure at a class-leading weight. - Giant hookless technology further enhances the rim’s durability with a more consistent carbon fiber structure, creating XC-level impact resistance and a rounder tire shape for better grip and handling as well as added sidewall support when cornering. - 25mm inner rim width is apt for larger volume road and gravel tires. - Dynamic Balanced Lacing technology ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency, creating a stiffer, more efficient wheel that winds up fast and carries more speed. - 54 tooth DT 350 hub offers near-instant engagement for quick power on technical climbs

The all-new SLR 1 36 Disc WheelSystem provides high-performance versatility, combining maximum power transmission with optimal stiffness, efficiency and weight savings to make it as quick on the climbs as it is confident on the descents.

The all-new SLR 1 36 Disc WheelSystem provides high-performance versatility, combining maximum power transmission with optimal stiffness, efficiency and weight savings to make it as quick on the climbs as it is confident on the descents.